COFFEE GRINDING
STEP 1
Turn the selector knob to align
the red arrow with the desired
grind.
STEP 5
Turn the ON/OFF switch to ON and
press the start switch.
39563.0000A 10/06 ©2006 Bunn-O-Matic Corporation
USE & CARE INSTRUCTIONS
STEP 2
Raise the top lid and add the
whole bean coffee. Close the
top lid.
STEP 6
Flip the cleaning lever a few times
as dispensing slows.
G1, G2 & G3 GRINDERS
STEP 3
Locate the back of a bag behind
the dispense chute. (The grinder
will not operate unless the bag
is behind the chute.) This will
activate the bag switch.
STEP 7
Remove the bag when ground
coffee is no longer dispensed
from the chute. The grinder will
stop automatically when the bag
is removed.
STEP 4
Allow the bag to rest on the
screen beneath the chute.
STEP 8
NOTE - The start switch will have
to be pressed again to continue
the cycle if the bag is removed
before grinding is completed.
Turn the ON/OFF/START switch
to the OFF position.
39563 102506