Table of Contents
Advertisement
Tray Controller
The Rimage Tray Controller icon (
initiated.
The tray controller must be running for the printer to function.
The Tray Controller application automatically runs in the background after the Production
Server starts. The Tray Controller is only available if the Liberty Printer Driver was installed.
The Printer Tray opens only if the PC is connected to the printer and the Tray Controller is
running.
Tray Controller Help
This section is a helpful procedure if the printer tray did not come out after pressing the disc
button.
1. Make sure the USB cable is plugged in at the printer and the PC.
2. Make sure the tray controller application is running. This is seen in the icon tray as shown here.
3. Make sure the tray controller application has finished initializing, by double-clicking on
the tray controller icon.
4. Check for the status. If the status is OK and there are no error messages in the tray controller
application, close the tray controller application and unplug the USB cable from the printer.
5. Plug the USB cable back in the printer.
) is installed in the Windows Icon Tray once it was
27
Advertisement
Table of Contents
