Table of Contents
Advertisement
Liberty Operator Panel
The Liberty printer operator panel has three buttons and four LEDs to indicate certain
conditions.
1 – Cancel Button
2 – Ink Cartridge Status LED
Cancel Button: Not used.
Ink Cartridge Status LED: Flashes when an ink cartridge is low on ink, incorrectly
installed, or when the printer cover is open. To check the ink cartridge status, refer to
"Ink Cartridge
Disc Button and LED: The Disc button is used to move the tray in and out, and to
load a disc for manual printing used in checking alignments. The Disc LED illuminates
when a disc is on the tray.
Power Button and LED: The Power button is unused.
on when the
Controller on page 27.
error state. Error conditions can be viewed at the Production Server, or in the status
field located inside the printer driver under the advanced tab.
Status" on page 11.
Tray Controller
is running and there is power to the printer. See Tray
The Power LED flashes when the printer is printing or in an
10
3 – Disc Button and LED
4 – Power Button and LED
The green Power LED is only
Advertisement
Table of Contents
