Management; Time & Schedule; Time - D-Link COVR-C1203 User Manual

Section 3 - Configuration
The Time page allows you to configure, update, and maintain the correct
time on the internal system clock. From here you can set the time zone, the
Network Time Protocol (NTP) server, and enable or disable daylight saving

time.

In the Management menu on the bar on the top of the page, click Time &
Schedule.
Time Configuration
Time Zone:
Select your time zone from the drop-down menu.
Time:
Displays the current date and time of the extender.
Enable Daylight Enable or disable daylight saving time.
Saving:
Automatic/Manual Time Configuration
Update Time
Enable or disable to allow an NTP server on the Internet to synchronize
Using an NTP the time and date with your extender. If you enable this option, select
Server:
an NTP server from the drop-down menu.
To configure the Covr Point's time and date manually, disable this
option and use the drop-down menus that appear to input the time
and date.
Click Save when you are done.
D-Link COVR-C1203 User Manual

Management

Time & Schedule
Time
61