Maytag Jetelean DWU7910AAE Repair Manual page 16

Jetelean series
Table of Contents

Advertisement

BEFORE
YOU
CALL
FOR SERVICE
Detergent
cup did not empty completely
(continued)
• Check to see that the cycle has been
Seems noisy
completed.
• Water circulation noise is normal.
• Be sure dispenser is not blocked from wash
• Humming during drain is normal,
action.
• Dishes may not be loaded properly. Dishes
• Be sure dispenser is not wet when detergent
should not be touching one another,
is added.
• Wash arm may be hitting an item when
* Make sure large items placed in the front
rotating. Load items so nothing blocks the
right corner of upper rack are not blocking
wash arm,
the detergent cup.
• Chopping or grinding noise may be heard
• Use fresh detergent. Store in dry, cool place.
during drain when the internal food disposer
Leaks
is chopping hard items such as fruit seeds,
• Check to see that the dishwasher is level as
nuts, etc.
described in the Installation Instructions.
• Detergent cup lid hits door liner when
• Suds can cause the unit to overflow so
dishwasher door is opened at end of cycle
measure detergent carefully: Try"another
and is normal,
brand of detergent. Use only detergents
• Installation (location, flooring, cabinetry,
designed for automatic dishwashers.
etc.) can affect noise level.
• Make sure you follow directions on how to
• Water valve hiss during fill is nornml,
add a forgotten item.
Does not run properlylWon't
fill
Has an odor
• Be sure door is tightly closed and latched.
• Soiled dishes held too long in the
• Cheek to see that water is turned on.
dishwasher can create an odor, therefore we
• The cycle is not properly selected. Be sure
recommend
using the Rinse & Hold cycle if
the dial is turned far enough or the cycle pad
available.
is completely depressed.
• Dishwashers will have a "new" smell when
• Cycle will start with drain,
first installed.
• Check your home's circuit breaker or fuse
• Dishwasher not draining properly. (See
box.
"Does not drain properly")
• Inlet hose may be kinked.
Chips dishware
• Water inlet valve may be clogged with
* Be sure dishes are loaded according to the
sediment and in need of cleaning,
instructions so the)' do not strike together
Does not drain properly
from the wash action.
• Check to see that the cycle has been
• We do not recommend washing fine antique
completed,
china aud crystal in the dishwasher.
• The dishwasher may be at a pause between
• Do not load glasses over rack tines, or allow
cycles which is normal,
to touch each other.
• Drain hose may be kinked.
° Do not overload.
• Elevate the drain hose 32" when installing.
For further assistance contact your Maytag
• Check your home's circuit breaker or fuse
dealer or call Maytag Customer Service:
box. Reset if necessary.
U.S.
1-800-688-9900
• Food is backing up in the pipes at the sink.
CANADA
1-800-688-2002
If hooked up to a food waste disposer, be
sure the knock-out is removed from the
disposer and it is run regularl_z
PAGE 15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents