1. Manuals
  2. Brands
  3. RIDGID Manuals
  4. Drill
  5. R820011
  6. Operator's manual

RIDGID R820011 Operator's Manual

3/8 in. 12 volt drill 2-speed
Hide thumbs Also See for R820011:
Table of Contents

Advertisement

Quick Links

Your drill has been engineered and manufactured to our high standards for dependability, ease of operation, and operator
safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator's manual before using this product.
Thank you for buying a RIDGID product.
SAVE THIS MANUAL FOR FUTURE REFERENCE
OPERATOR'S MANUAL
3/8 in. 12 VOLT DRILL
2-SPEED
R820011
1

Advertisement

Table of Contents
loading

Related Manuals for RIDGID R820011

Summary of Contents for RIDGID R820011

  • Page 1 Your drill has been engineered and manufactured to our high standards for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product.

  • Page 2: Table Of Contents

    TABLE OF CONTENTS  Introduction ...2  General Safety Rules ... 3-4  Specific Safety Rules ...4  Safety Rules for Charger ...5  Symbols ... 6-7  Features ... 8-9  Assembly ...9  Operation ... 10-15  Maintenance ... 16-17 ...

  • Page 3: General Safety Rules

    Use of any other batteries may create a risk of fire.  Use battery only with charger listed. MODEL BATTERY PACK R820011 130252002 130252002  Do not abuse the cord. Never use the cord to carry the charger. Keep cord away from heat, oil, sharp edges, or moving parts.

  • Page 4: Specific Safety Rules

    GENERAL SAFETY RULES SERVICE  Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel may result in a risk of injury. SPECIFIC SAFETY RULES  Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring.

  • Page 5: Safety Rules For Charger

    SAFETY RULES FOR CHARGER WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.  Before using battery charger, read all instructions and cautionary markings in this manual, on battery charger, battery, and product using battery to prevent misuse of the products and possible injury or damage.

  • Page 6: Symbols

    SYMBOLS Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta- tion of these symbols will allow you to operate the tool better and safer. SYMBOL NAME Volts Amperes Hertz Watt Minutes Alternating Current...

  • Page 7: Symbols

    SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL DANGER: WARNING: CAUTION: CAUTION: SERVICE Servicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service we suggest you return the product to the nearest AUTHORIZED SERVICE CENTER for repair.

  • Page 8: Features

    FEATURES PRODUCT SPECIFICATIONS Chuck ...3/8 in. Keyless Motor ... 12 Volt DC Switch ...Variable Speed No Load Speed ... 0-380/0-1,300/min. KEYLESS CHUCK BATTERY Clutch ... 24 Position Torque ... 350 in.lb. Charger Input ... 120 V, 60 Hz, AC only Charge Rate ...

  • Page 9: Assembly

    Before attempting to use this product, familiarize yourself with all operating features and safety rules. BIT STORAGE Bits provided with the drill can be placed in the storage area, located on the base of the drill. CHARGER The charger has a key-hole hanging feature for convenient, space-saving storage.

  • Page 10: Operation

    OPERATION WARNING: Do not allow familiarity with your tool to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury. WARNING: Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes resulting in possible serious injury.
  • Page 11 OPERATION LED FUNCTION OF CHARGER See Figure 3. INDICATOR Power Evaluate Evaluate Evaluate Charging Full GREEN LED RED LED BATTERY PACK Without battery pack ON Hot battery pack Flashing Cold battery pack Flashing Deeply discharged Flashing Fast charging Slow charging POWER INDICATOR EVALUATE...
  • Page 12 SWITCH TRIGGER See Figure 5. To turn the drill ON, depress the switch trigger. To turn it OFF, release the switch trigger. VARIABLE SPEED The variable speed switch trigger delivers higher speed and torque with increased trigger pressure and lower speed with decreased trigger pressure.
  • Page 13 The drill has a two-speed gear train designed for drilling or driving at LO (1) or HI (2) speeds. A slide switch is located on top of the drill to select either LO (1) or HI (2) speed. When using drill in the LO (1) speed range, speed will decrease and unit will have more power and torque.

  • Page 14: Installing Bits

    • For heavy drilling BIT STORAGE See Figure 9. When not in use, the bit provided with this drill can be placed in the storage area located on the rear of the drill.\ INSTALLING BITS See Figure 10 - 11.

  • Page 15: Operation

     Secure the material to be drilled in a vise or with clamps to keep it from turning as the drill bit rotates.  Hold the drill firmly and place the bit at the point to be drilled.  Depress the switch trigger to start the drill.

  • Page 16: Maintenance

    Only the parts shown on the parts list are intended to be repaired or replaced by the customer. All other parts should be replaced at a RIDGID authorized service center. BATTERY PACK REMOVAL AND PREPARATION FOR RECYCLING...
  • Page 17  Insert a 5/16 in. or larger hex key into the chuck of the drill and tighten the chuck jaws securely.  Tap the hex key sharply with a mallet in a clockwise di- rection. This will loosen the screw in the chuck for easy removal.
  • Page 18 NOTES...

  • Page 19: Warranty

    2/1/04 and after. This product is manufactured by One World Technologies, Inc. The trademark is licensed from RIDGID, Inc. All warranty communications should be directed to One World Technologies, Inc., attn: RIDGID Hand Held and Stationary Power Tool Technical Service at (toll free) 1-866-539-1710.

  • Page 20: Customer Service Information

    R820011 Customer Service Information: For parts or service, contact your nearest RIDGID authorized service center. Be sure to provide all relevant information when you call or visit. For the location of the authorized service center nearest you, please call 1-866-539-1710 or visit us online at www.ridgid.com.

Table of Contents