Unpacking And Tools Needed - RIDGID MS 1065LZ Operator's Manual

UNPACKING
Your Compound Miter Saw has been shipped completely
assembled except for the blade, miter lock handle, dust
guide or dust bag, laser guide, and work clamp.
Remove all loose parts from the carton. Separate and
check with the list of loose parts. See Figure 1.
Remove the packing materials from around your saw.
Carefully lift saw from the carton by the carrying handle
and place it on a level work surface. Although small, this
saw is heavy. To avoid back injury, get help when needed.
Do not discard the packing materials until you have
carefully inspected the saw, identified all loose parts,
and satisfactorily operated your new saw.
TOOLS NEEDED
The following tools (not included) are needed for checking adjustments of your saw or for installing the blade:
FRAMING SQUARE
Examine all parts to make sure no breakage or damage
has occurred during shipping.
If any parts are damaged or missing, please call
1-866-539-1710 for assistance.
WARNING:
If any parts are missing, do not operate this tool
until the missing parts are replaced. Failure to do so
could result in possible serious personal injury.
12 mm COMBINATION WRENCH
8
COMBINATION
SQUARE