Gear Assembly P2/Gear Assembly P3; Base Assembly P2/Base Assembly P3; Base Loading - Philips DVP3350V/01 Service Manual

DISASSEMBLY AND ASSEMBLY OF DECK MECHANISM
Gear assembly P3 Hole
Lever Tension Boss
31. Gear Assembly P2 (Fig. A-8-1)/
Gear Assembly P3 (Fig. A-8-2)
1) Lift the gear assembly P2 upward.
2) Lift the gear assembly P3 upward.
CAUTIONS
For the assembly, check that the holes of both the gear
assembly P2 and P3 are adjusted straightly, and then line up
the gear section groove (A) to the plate slider hole (B).
Gear assembly P2 Hole
Plate slider Hole(B)
Chassis
(H12)
(H14)
(B)
Base Assembly P3
(Fig. A-8-4)
Base Assembly P2
(Fig. A-8-3)
Fig. A-8
32. Base Assembly P2 (Fig. A-8-3)/
Base Assembly P3 (Fig. A-8-4)
1) Disassemble the base assembly P2 downward while
moving it toward the arrow (A) direction along with the
guide hole of chassis.
2) Disassemble the base assembly P2 downward while
moving it toward the arrow (B) direction along with the
guide hole of chassis.
33. Base Loading (Fig. A-8-5)
1) Release 3 hooks (H12, 13, 14) of the base loading, and
then disassemble them upward.
- Reverse the mechanism.
4-11
Gear Assembly P3
(Fig. A-8-2)
Gear Assembly P2
(Fig. A-8-1)
(H13)

Base Loading

(Fig. A-8-5)
(A)