Using The Self-Timer - Ricoh G600 User Manual

t Using the Self-Timer
You can set the Self-timer to shoot after either two or ten seconds.
A setting of two seconds is useful for preventing camera shake.
1
With the camera ready to
shoot, press the t (Self-
timer) button.
• The Self-timer symbol appears on
the screen.
• The [10] to the right of the symbol
indicates the number of seconds.
In this case, if you press the
shutter release button, the camera will shoot after 10 seconds.
• Each press of the t button changes the self-timer setting in the
following order: 10 sec, 2 sec, and Self-timer Off.
2
Press the shutter release button.
• The focus is locked, and the AF auxiliary light blinks when the
self-timer starts.
• Once the picture is taken, the self-timer turns off.
Note ---------------------------------------------------------------------------------------------------
When the self-timer is set to 2 seconds, the AF auxiliary light does not blink.
48