Removal From Storage - Polaris Ranger 1000 Diesel Owner's Manual

Removal from Storage

1. Charge the battery if necessary. Install it in the vehicle.
2. Fill the fuel tank with fuel.
3. Check all the points listed in the Daily Pre-Ride Inspection section on page 36. Tightness
of the bolts, nuts and other fasteners should be checked by an authorized POLARIS
dealer.
4. Lubricate at the intervals outlined in the Periodic Maintenance Chart beginning on page
65.
Transporting the RANGER
Follow these procedures when transporting the vehicle.
1. Place the transmission in PARK.
2. Stop the engine.
3. Slowly release the brake pedal and make sure the transmission is in PARK before exiting
the vehicle.
4. Secure the fuel cap, hood and cargo box. Ensure that the seats are attached correctly and
are not loose.
WARNING! Cargo and other loose vehicle parts may fly off while transporting this vehicle. Secure or
remove all cargo, and inspect the unit for loose parts prior to transport.
5. Always tie the frame of the RANGER to the transporting unit securely with suitable
straps or rope. Do not attach tie straps to the front A-arm bolt pockets.
6. Remove the key to prevent loss during transporting.
MAINTENANCE
99