Toyota TUNDRA Manual page 562

562
8-2. Steps to take in an emergency
Warning message
Drive-Start
Control
Malfunction
Visit Your Dealer
Release
Accelerator
Turn Lights Off
(Flashes)
Headlight System
Malfunction
Visit Your Dealer
Headlight System
Malfunction
Visit Your Dealer
(If equipped)
Tire Pressure Low
Check Tire
Auto High Beam Ready
Turn ON High Beam to
Activate
(If equipped)
Details/Actions
Indicates a malfunction in the Drive-start control.
A buzzer also sounds.
→ Have the vehicle inspected by your Toyota
dealer immediately.
Indicates that the shift position was changed and
Drive-Start Control was operated while depress-
ing the accelerator pedal.
→ Momentarily release the accelerator pedal.
Indicates that the headlight switch is left on (with
the key removed and the driver's door opened)
A buzzer also sounds.
→ Turn the lights off.
Indicates a malfunction in:
• The automatic headlight leveling system; or
• The LED headlight system (if equipped).
A buzzer also sounds.
→ Have the vehicle inspected by your Toyota
dealer.
Indicates a malfunction in the Automatic High
Beam system.
→ Have the vehicle inspected by your Toyota
dealer.
Indicates that the tire inflation pressure is low.
→ Check the tire inflation pressure, and
adjust to the appropriate level.
Indicates that the Automatic High Beam switch is
pressed while the headlights are in low beam.
→ Turn the high beam on and press the Auto-
matic High Beam switch again.