Toyota TUNDRA Manual page 459

3
Press and hold the desired
®
HomeLink
vehicle) for 2 seconds and
release it.
sequence
release) up to 3 times to
complete programming.
If the garage door opener
motor operates when the
®
HomeLink
pressed, the garage door
opener motor recognizes the
®
HomeLink
■
Enabling 2-way communication with a garage door (only avail-
able for compatible devices)
When enabled, 2-way communication allows you to check the sta-
tus of the opening and closing of a garage door through indicators
in your vehicle.
2-way communication is only available if the garage door opener
motor used is a compatible device. (To check device compatibility,
refer to www.HomeLink.com.)
1
Within 5 seconds after programming the garage door opener has
been completed, if the garage door opener motor is trained to
®
HomeLink
idly green and the light on the garage door opener motor will
blink twice, indicating that 2-way communication is enabled.
If the indicators do not flash, perform
presses of the HomeLink
completed.
6-4. Using the other interior features
button (inside the
Repeat this
(press/hold/
button
signal.
, both garage door operation indicators will flash rap-
®
button after programming has been
is
2
and
3
within the first 10
459
6