Advertisement
Quick Links
Thank you for purchasing the Sharper Image Automatic Shoe Cover Dispenser.
Please read these instructions prior to using this device for the first time.
PRODUCT STRUCTURE
HOW TO USE
1. Place the Automatic Shoe Cover Dispenser on the floor. Press the unit firmly on the floor to
ensure the skid proof pads stay in place. Note: If the unit is easy to move when using, wipe both
the floor and skid proof pads with a wet towel.
2. When the unit is turned on the indicator light will illuminate. Press the foot switch for 1 second
to activate. Note: The indicator light will go off automatically after 1 minute and enter power
saving mode.
AUTOMATIC SHOE COVER DISPENSER
Item No: 206133
Owner's Manual
- 1 -
Advertisement
Related Manuals for Sharper Image 206133
Summary of Contents for Sharper Image 206133
- Page 1 AUTOMATIC SHOE COVER DISPENSER Item No: 206133 Owner’s Manual Thank you for purchasing the Sharper Image Automatic Shoe Cover Dispenser. Please read these instructions prior to using this device for the first time. PRODUCT STRUCTURE HOW TO USE 1. Place the Automatic Shoe Cover Dispenser on the floor. Press the unit firmly on the floor to ensure the skid proof pads stay in place.
- Page 2 HOW TO USE IN 3 STEPS 1. Ensure the film is curled upwards before placing your heel between the shoe plates. 2. Slowly slide your foot down the unit. Press the tip of your toe on the foot switch for 3 seconds. Hold for a few seconds to seal.
- Page 3 HOW TO CHARGE 1. Plug the charger into an AC power outlet. 2. Plug the charging cable into the charging jack of the unit. NOTE • Ensure the unit is switched on when charging. • Unplug the charger after charging is finished. •...
- Page 4 • Keep unit away from water. WARRANTY / CUSTOMER SERVICE Sharper Image branded items purchased from SharperImage.com include a 1-year limited replacement warranty. For Customer Service, please call 1 (877) 210-3449. The SHARPER IMAGE® name and logo are registered trademarks.