Installing The Honeywell Webplugin; Understanding The Web Client Interface - Honeywell HDZ302LIK Configuration Manual

16 | HDZ IR Series OSD Configuration Guide
4.

Installing the Honeywell Webplugin

1.
2.
3.

Understanding the Web Client Interface

The layout of the Honeywell Viewer web client is shown below:
www.honeywell.com/security
To log in to the web client, type your user name (default: admin) and password (default:
1234), and then click Login.
The first time you connect to a camera, a request to install an ActiveX control will appear in
your browser's information bar. Right-click the information bar and then click Allow
ActiveX control.
The Security Warning window will appear. Click Install to start the Honeywell webplugin
software installation.
After the installation has completed, click Finish to close the installation window.
Note If your browser doesn't allow the Honeywell webplugin to install, check your Internet
security settings and ensure that ActiveX controls and plug-in settings are enabled.