Syntax For Command Line Parameters - IBM 1G User Manual

Field
User
Password
Note: You can change the password through the command line interface or through the management
interface.

Syntax for command line parameters

This topic outlines the syntax required to set or to retrieve values using the command line parameters.
Permissions required
Only the Admin account has permissions to set and to retrieve system parameters.
Command line syntax
Use the following command line syntax to set or to retrieve values for parameters.
Command
cli get |more
cli get parameter_ name
cli set parameter_name parameter_value
22
1G Network Active Bypass: User Guide
Description
Type the user name
Note: The default user is admin.
Type the password
Note: The default user is admin.
Action
Outputs values for all parameters
Specifies a value for the parameter
Example: Typing cli get timeout displays the timeout
value in decimal form
Sets a value for the parameter you specify
Example: Typing cli set timeout 20 sets the timeout
value to 20