Configuring Snmp Traps - IBM 1G User Manual

Field
Subject

Configuring SNMP traps

About this task
The Network Active Bypass unit provides an SNMP trap function that can send messages to a trap server
when the segment status or power supply status changes. Use the SNMP Settings page to configure the
SNMP destination IP and SNMPv2 community name, and to enable or disable the SNMP trap function.
Procedure
Complete the fields as indicated in the following table.
Field
Send SNMP Traps
SNMP traps destination IP
SNMPv2 community
Description
Subject to be displayed in the subject line of the outgoing
e-mail message
Example: "Proventia NAB status report"
Description
Enable or disable the sending of SNMP traps
Default: Disabled
Destination IP of the SNMP trap server
Default: localhost
Community name of the SNMP trap server
Default: public
Chapter 3. Configuring the Network Active Bypass unit in the management interface
17