Aplet View Configuration - HP 40G User Manual

Downloaded from www.Manualslib.com

Aplet view configuration

Plot Setup
Numeric Setup
Symbolic
Setup
To change views
To save aplet
configuration
Getting started
manuals search engine
Displays pictures to
supplement an aplet.
See "Notes and sketches" on
page 14-1 for further
information.
You use the keys (
SETUP
configure the aplet. For example, press
( )to display the input form for setting the aplet's
plot settings. Angle measure is controlled using the
view.
Press - . Sets
SETUP PLOT
parameters to plot a graph.
Press - . Sets
SETUP NUM
parameters for building a table
of numeric values.
This view is only available in
the Statistics aplet in 2VAR
mode, where it plays an
important role in choosing data
models. Press (
SETUP
.
SYMB
Each view is a separate environment. To change a view, select
a different view by pressing
select a view from the VIEWS menu. To change to HOME,
press . You do not explicitly close the current view,
you just enter another one—like passing from one room into
another in a house. Data that you enter is automatically saved
as you enter it.
You can save an aplet configuration that you have used, and
transfer the aplet to other HP 39G/40G calculators. See
"Sending and receiving aplets" on page 16-5.
, and ) to
-
SETUP PLOT
MODES
, , keys or
1-17