Input Forms; Mode Settings - HP 40G User Manual

Downloaded from www.Manualslib.com

Input forms

Reset input
form values

Mode settings

H I N T
Getting started
manuals search engine
An input form shows several fields of information for you to
examine and specify. After highlighting the field to edit, you
can enter or edit a number (or expression). You can also select
options from a list ( ). Some input forms include items
8CPPT—
to check ( ). See below for an example of an input form.
•8CF—
To reset a default field value in an input form, move the cursor
to that field and press . To reset all default field values in
the input form, press
CLEAR
You use the Modes input form to set the modes for HOME.
Although the numeric setting in Modes affects only HOME,
the angle setting controls HOME and the current aplet. The
angle setting selected in Modes is the angle setting used in
both HOME and current aplet. To further configure an aplet,
you use the keys (
SETUP
Press to access the HOME MODES input form.
MODES
Setting Options
Angle Angle values are:
Measure Degrees. 360 degrees in a circle.
Radians. 2π radians in a circle.
Grads. 400 grads in a circle.
The angle mode you set is the angle
setting used in both HOME and the
current aplet. This is done to ensure that
trigonometric calculations done in the
current aplet and HOME give the same
result.
.
and ).
1-9