Service manual
2.
Now carefully lift up the plastic cover from the left
side (the side with no encoder wheels) and rotate
it towards you, to the left bottom side.
3.
This allows the right side of the cover to be
separated from the encoder wheels that are
located through the plastic cover.
4.
Lift up the cover at the top right hand corner, away
from the hinge.
5.
Remove it from the screen assembly.
M1 HD - Revision A, 05-16-2017
1
2
Figure 15: Lifting the plastic cover
Figure 16: Separating right side of the cover
Figure 17: Removing cover top
3
11 of 13