Removing The Screen Cover Of The M1 Hd Controller - Martin M1 HD Service Manual

Service manual
4. Remove the six black screws (4) using the Torx
20 key. There are two in the front and four on the
back panel.
5. Carefully tilt up the front panel away from the base
assembly and rotate it towards you when standing
in front of the controller. In this way, all connectors
from the front panel to the base assembly remain
connected.
Removing the screen cover of the M1 HD
controller
1. Remove the nine black screws (1) using the Torx
10 key.
M1 HD - Revision A, 05-16-2017
4
Figure 12: Unscrewing the six black screws
Figure 13: Front panel
Figure 14: Removing the nine black screws
1
10 of 13