DGP2641EQ03.qxd
1/18/2005
To Disarm when entering:
1.
Enter your [
ACCESS CODE
Select the area(s) if necessary.
2.
To send a silent or audible alarm to your monitoring station, press and hold one of
the button combinations listed in the table below for 2 seconds.
HOW TO BYPASS ZONES
When a zone is bypassed, it remains
unarmed once the corresponding area
is armed.
1.
Enter your [
ACCESS CODE
2.
Press the [
] button.
BYP
3.
Use the [ ] and [ ] buttons to
scroll through the zones, and then
press [
] once the desired zone
BYP
appears on the screen. If necessary,
repeat to bypass more zones.
4.
Press [
] to save and exit.
ENTER
*Some features mentioned in this Quick Start need to be activated by your Installer.
*We recommend that you test your security system on a weekly basis. Please refer to
the appropriate user manual.
PRINTED IN CANADA - 01/2005
10:22 AM
Page 2
HOW TO DISARM
To Disarm from within the perimeter:
].
1.
Enter your [
press the [
2.
Select the area(s) if necessary.
PANIC BUTTONS
ALARM MEMORY DISPLAY
To view the alarms that occurred during
the last armed period:
1.
Press the [
].
All the zones that were breached
during the last armed period will
scroll on the screen.
Press [
2.
CLEAR
DGP2641-EQ03
www.paradox.ca
], and then
ACCESS CODE
] button.
DISARM
] button.
MEM
] to exit.
®