Samsung GT-i9000B Service Manual page 23

7. Level 2 Repair
5
Pull out the Main PBA
After disconnecting the connectors carefully pull the Main
PBA out of the bracket.
Remove the top shield can
7
Pull out the Receiver module from the bracket. Be
careful not to damage the FPC.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
6
Remove the Antenna Cable
Remove the antenna cable from the main Antenna PCB
on the sub-touch key module.
Remove the Camera Module
8
Remove the camera module from the Main PBA by
pulling it out.
7-2