7. Level 2 Repair
7-1. Disassembly and Assembly Instructions
7-1-1. Disassembly
1
Unscrew screws on the rear
Unscrew 7 screws on the rear using a screw driver.
screw torque : 1.2 ~ 1.4 kgf.cm
3
Detach the Power Key FPCB
Detach the power key FPCB, that is stick to the bracket
by a double-sided tape, using tweezers. Make sure to
remove all remaining tape on the bracket.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
2
Unhook the rear using a disassembly knife
to remove the rear cover
Be careful not to damage the rear cover when
unhooking it.
4
Disconnect connectors from the Main PBA
Disconnect LCD Connector,Receiver Connector, Sub-
touch Key Connector and Antenna cable from the Main
PBA
7-1