Chapter 3. Configuring The System; Checking Your Web Browser Settings For The Management Gui; Copyright Ibm Corp - IBM Storwize V5000 Gen2 Quick Installation Manual

Chapter 3. Configuring the system

After initializing the system, you will use the Storwize management GUI to
complete the configuration procedures.
v The management GUI requires a supported web browser (see "Checking your
v To configure a new system, you will log on to the management GUI with the

Checking your web browser settings for the management GUI

To access the management GUI, you must ensure that your web browser is
supported and has the appropriate settings enabled.
Before you begin
The management GUI supports the following web browsers:
v Mozilla Firefox 41
v Mozilla Firefox Extended Support Release (ESR) 38
v Microsoft Internet Explorer (IE) 11 and Microsoft Edge
v Google Chrome 46
IBM supports higher versions of the browsers if the vendors do not remove or
disable function that the product relies upon. For browser levels higher than the
versions that are certified with the product, customer support accepts usage-related
and defect-related service requests. If the support center cannot re-create the issue,
support might request the client to re-create the problem on a certified browser
version. Defects are not accepted for cosmetic differences between browsers or
browser versions that do not affect the functional behavior of the product. If a
problem is identified in the product, defects are accepted. If a problem is identified
with the browser, IBM might investigate potential solutions or work-arounds that
the client can implement until a permanent solution becomes available.
Procedure
To configure your web browser, follow these steps:
1. Enable JavaScript for your web browser.
© Copyright IBM Corp. 2016
web browser settings for the management GUI").
default user name and password (see "User name and password for system
initialization").
For Mozilla Firefox, JavaScript is enabled by default and requires no additional
configuration.
For Microsoft Internet Explorer (IE) running on Microsoft Windows 7:
a. In Internet Explorer, click Tools > Internet Options.
b. Click Security Settings.
c. Click Internet to choose the Internet zone.
d. Click Custom Level.
e. Scroll down to the Scripting section, and then in Active Scripting, click
Enable.
f. Click OK to close Security Settings.
g. Click Yes to confirm the change for the zone.
41