Advertisement
4
Complete Setup
The setup of your Repeater is now complete. If you wish to change the
name (SSID)
of your home/office wireless network (Outdoor_Repeater)
you may do so here.
Click
Finish
to complete your setup then click
and reboot. The wizard will prompt you to test your Internet connection
after the system has rebooted.
5
Find an Optimal Installation Location
To obtain the best performance, your Hi-Gain
Repeater should be placed in an optimal location in your home or office. Find a location
that is closest to the wireless Internet connection that you are trying to connect to. The
Hawking Logo on the front should face the direction of the wireless internet connection.
Before mounting the Repeater, use the configuration setup (Steps 2-4) to ensure the
Repeater has found a strong signal to repeat.
Make sure the Repeater is placed in a location where it can receive a
strong signal from the wireless Internet connection you wish to connect
to. The Repeater will not work without a signal that it can repeat.
A. Direct the Outdoor Smart Repeater's Directional Antenna towards the Source of
your Wireless Internet Connection
The Internal Hi-Gain Wireless Directional Internet Antenna is designed so that the
Hawking logo should be pointed towards your wireless source
See the diagram to the right for antenna orientation instructions
B. Plug in the Power Adapter
When you have completed the physical setup, plug in the included power adapter from
the PoE injector in an available power outlet.
6
Position your Dual Radio Smart Repeater
With the initial configuration complete, you may now mount the Smart Repeater in your desired location.
See the instructions below on how to install the Repeater with the included mounting kit.
Mounting and Assembly Instruction
Note: DO NOT mount your Smart Repeater
until you have completed the initial
configuration.
Double check the contents of your mounting
kit before you begin installation
1. Square Nut (2 pcs)
2. M5-12 Screw (2 pcs)
3. M Shape Mounting (1 pc)
4. Pole (not included)
5. Hose Clamp (1 pc)
6. Wall Screw (2 pcs)
7. Wall Anchor ( 2 pcs)
8. Wall (not included)
9. Omni-Directional Antenna (2 pcs)
10. RJ-45 Connector (1 pc)
11. Water Proof Gasket Kit for RJ-45 (1 pc)
Technical Support: 1.888.202.3344 or techsupport@hawkingtech.com
If you wish to add a
wireless security
password
to your
home/office network
you may enter one
here. All users
logging in through
the Repeater will be
required to enter
this passcode.
Apply
to confirm settings
Outdoor Wireless-N Dual Radio Smart
™
The HOW2R1 has many additional setup features. To access these settings you may
click on any of the main menu tabs located on the interface:
Tools.
For more information on the advanced features and settings of the Hi-Gain
Wireless-N Dual Radio Smart Repeater please refer to the User's Manual.
1
2
Scan and connect to an outside wireless network
General
Setup,
Status
Outdoor
™
Wireless Internet
Connection
© 2011 Hawking Technologies, Inc. All rights reserved. All trademarks herein are the property of
their respective owners. Apple and Mac are registered trademarks of Apple Computer, Inc. No
affiliation implied or expressed.
and
Advertisement
