In Vehicle Installation - NextBase NBDVR612GW Instruction Manual

IN VEHICLE INSTALLATION

Please follow the instructions below for first-time installation of the Dash Cam. For day to day use
simply remove the camera from the mount as required.
1. Insert MicroSD Card
Insert a suitable MicroSD card in to the Dash Cam, taking care that the gold contacts are
facing towards the LCD screen side of the Dash Cam. Push the memory card until it clicks
into place.
Note:
- Use the edge of a small coin (or similar object) to push the memory card in place if required.
Take care that card has 'clicked' into place, a second push inwards will release the memory
card.
- Do not remove or insert the memory card when the Dash Cam is turned on. This may
damage the memory card.
2. Remove dust cover from Dash Cam
Remove the dust cover that is located on the top of the Dash Cam to gain access to the
mounting point.
To remove the dust cover, slide it forwards away from the LCD screen of the Dash Cam.
Note:
- If the Dash Cam is not to be used for a period of time please replace the dust cover to
help keep the metal contacts free of dust or other contaminants.
14