Removing And Replacing The Camera Assembly - Motorola V235 Service Manual

Level 1 and 2 Service Manual

Removing and Replacing the Camera Assembly

G
6809495A43-C
1. Remove the battery cover, battery, SIM, antenna, rear housing, and
transceiver board assembly, flip assembly cover, and flip display bracket as
described in the procedures.
The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when
handling.
2. Use the plastic tweezers to remove the camera assembly snubber from the flip
assembly (see Figure 16). Set the snubber aside for reassembly.
Camera Assembly Snubber
Figure 16. Camera Assembly Snubber Removal
April 03, 2006
Disassembly
050480o
35