Panasonic WJ-MPU955 Operating Instructions Manual page 21

Central processing unit
Hide thumbs Also See for WJ-MPU955:
Table of Contents

Advertisement

TimeDateFormat=1
***{ Time-Hour Display format
***{ Format: TimeHourFormat=<format> }
***{
format 0 - 12 Hour
***{
format 1 - 24 Hour
TimeHourFormat=0
UNIT section
[CAUTION] This section should not be changed.
[UNIT]
***{ The unit ID should be the same as the one defined in }
***{ the Global Admin database for this unit.
***{ For single-unit systems, use ID=1. (ID=0 is invalid)
ID=1
RMS section
[CAUTION] This section does not apply to the MPU955 system, and should not be changed.
[RMS]
***{ This section is optional. It is not required unless
***{ System defaults are not acceptable. Delete the
***{ single asterisks below to make this section active. }
***{ Required only for PSDIC RMS
*NumDedicatedRecorders=0
*NumBackupRecorders=0
*Review=0,0,0
*Backup=0,0,0
*IdleSource=0
*Links=0,0
LOG section
This section sets the frequency with which log files are saved to hard disk. The defaults below have the logs being
copied every 10 minutes and stored for 7 days.
[LOG]
***{ This section is optional. It is not required unless
***{ System defaults are not acceptable. Delete the
***{ single asterisks below to make this section active.
***{ Log generation/save characteristics
***{ Format: <LogFileName>=<Minutes>,<Days>
***{
Minutes = Frequency to copy to HD (1 - 30 min) }
***{
Note: Values outside this range = 1 min. }
***{
Days = days to save on HD (5 - 30)
UserLog=10,7
SwLog=10,7
(SwLog is not currently supported)
AlarmLog=10,7
VideoLossLog=10,7
}
}
}
}
}
}
}
}
}
}
}
}
}
21

Advertisement

Table of Contents
loading

Table of Contents