Siemens Gigaset S450 IP Manual page 12

First Steps
. The VoIP providers are
§OK§
shown for which VoIP profiles
are available.
q
Select your VoIP provider and
press
§OK§
The necessary general access data for your
VoIP provider is downloaded and saved on
the phone.
If the data for your VoIP provider is not offered
as a download, press the display key ".
You can then carry out the following steps as
instructed by the connection assistant.
You must then make the necessary settings for
the VoIP provider with the Web configurator
(page 31). Your VoIP provider will supply you
with this data.
Entering user data for your first
VoIP account
Enter the VoIP user data for the first VoIP
account. Your VoIP provider will supply
you with this data.
Using the Web configurator, you can later
enter three further VoIP accounts (VoIP phone
numbers) set up with the same VoIP provider.
Your phone can then (together with your fixed
network number) be reached under up to five
different phone numbers. You can assign the
phone numbers to individual handsets regis-
tered with the base station (page 30).
Username:
If this is required by your pro-
vider, enter the user name and
press
§OK§
Authent. Name:
Enter the registration name
and press
Authent. Password:
Enter password and press
Note:
Please note when making these entries that
the VoIP user data is case sensitive. When
entering text, the first letter is capitalised as
standard. Press and hold the # key if neces-
sary to switch between upper/lower case text
and numerical entry.
11
.
.
.
§OK§
§OK§
Completing the VoIP settings
Once you have made all the necessary
entries, the message
plete" is displayed. The handset returns to
idle status.
If all the settings are correct and if the
phone can make a connection to the VoIP
server, then the internal name of the
handset will be displayed (example):
Ð
INT 1
10.08.06
FixedLine
You can now use your phone to make calls
via the fixed network (fixed line) and the
Internet! Callers can reach you on your
fixed network number and your VoIP
number!
Note:
To ensure that you can always be reached via
the Internet, the router must be permanently
connected to the Internet.
No connection to the Internet/VoIP server
If one of the following messages is dis-
played instead of the internal name after
the connection assistant is closed, then a
fault has occurred:
Server not accessible!
The phone has no connection to the Inter-
net.
¤
Check the cable connection between
the base station and the router (the
LED on the base station must light up)
.
and the connection between the router
and the Internet connection.
¤
Check whether the phone is connected
to the LAN. It might not have been pos-
sible to assign an IP address to the
phone or the IP address has already
been assigned to another LAN sub-
scriber and cannot be changed.
"Connection data com-
V
09:45
IP