Haier H2F-220WSAA Instructions For Use Manual page 11

FUNCTIONS
Insertion into a row of kitchen units
The appliance can be inserted into a row of kitchen units. To match the appliance to the height of
the row of the units, a suitable stack cabinet can be added. When inserting the appliance into a row
of standard kitchen units (max. depth 580 mm), the appliance can be installed directly next to the
kitchen unit. The appliance door projects relative to the front of the kitchen unit by 34mm at the
side and by 55mm in the middle of the appliance. It can be opened and closed perfectly as a result.
Important for the ventilation:
At the back of the stack cabinet, there has to be a ventilation duct of at least 50mm depth
throughout the width of the stack cabinet.
The ventilation space under the ceiling has to be at least 300cm².
The larger the ventilation space, the more energy-saving the appliance is in operation.
If the appliance is installed with the hinges next to a wall, the distance between appliance and wall
has to be at least 55mm. This corresponds to the projection of the handle when the door is open.
min.
min.
2
300cm
300cm
2
10