Figure 18. Installing the optical drive bracket
Figure 19. Installing the optical drive
5. Connect the signal cable and the power cable to the new optical drive.
6. Reinstall the removed parts. To complete the replacement, see "Completing the parts replacement" on
page 43.
Replacing the storage drive
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
1. Remove the computer cover. See "Removing the computer cover" on page 16.
2. Remove the front bezel. See "Replacing the front bezel" on page 17.
3. Remove the optical drive. See "Replacing the optical drive" on page 18.
4. Disconnect the signal cable and the power cable from the storage drive.
20
M710e User Guide and Hardware Maintenance Manual