INSTALLATION INSTRUCTIONS FEATURES Front Control Panel Air Filter Door Gasket Door Drum Window Air Intake Back Casing Exhaust Vent Back Cover...
Page 2
Important: If you wish to install the dryer with a stacking kit, we strongly recommend only using the Danby Dryer with the Danby Laundry Stacking Kit and ensure that you follow all installation instructions that come with the Laundry Stacking Kit.
Page 3
INSTALLATION INSTRUCTIONS WALL MOUNTING INSTRUCTIONS 1. Determine where you would like the dryer positioned and mark the required bracket position on the wall. 2. Securely affi x the hanging brackets to the wall. Brace • The hanging brackets must be screwed into wall studs to ensure the installation is secure.
Page 4
INSTALLATION INSTRUCTIONS WALL MOUNTING INSTRUCTIONS 1. Install the exhaust connector on the back of the unit. The exhaust connector can be aimed in any direction that is convenient for your installation. Exhaust connector 2. Using four 12mm screws, attach the plastic spacers to the rear of the unit.