Other Functions - Siemens RVP201.0 Manual

Other functions

Operating modes
Type summary
Equipment combinations
Suitable sensors and
room units
2/12
Siemens
Building Technologies
With all three types of plant, one of the following control modes can be used:
Weather-compensated
Weather-compensated with room temperature influence
Room temperature-compensated
Room temperature-dependent quick setback and boost heating
ECO automatic energy saver for load-dependent switching of heating
D.h.w. heating with choice of priority
Frost protection for the plant and the space in all operating modes
Remote control with room unit
Note: some of the above functions require appropriate control equipment (sensors, etc.)
Automatic operation normal / protection mode
Automatic changeover between normal temperature and protection mode
according to the 24-hour or weekly program, ECO automatic energy saver,
d.h.w. heating
Automatic operation normal / reduced
Automatic changeover between normal and reduced temperature according to
the 24-hour or weekly program, ECO automatic energy saver, d.h.w. heating
Setback mode
Continuous heating to the reduced temperature, with ECO automatic energy
saver, d.h.w. heating
Normal mode
Continuous heating to the normal temperature, no ECO automatic energy
saver, d.h.w. heating
Protection mode
Frost protection is ensured
Manual operation
Control switched off, d.h.w. charging pump and heating circuit pump running
Automatic d.h.w. heating
Heating control in protection mode
Note: d.h.w. heating is provided only by the RVP211
Type of unit
Heating controller without time switch
Heating controller without time switch, with d.h.w. heating
Analog 24-hour time switch
Analog weekly time switch
Flow, boiler and d.h.w. temperature: all sensors with LG-Ni 1000 sensing element,
such as
Strap-on temperature sensor QAD22
Immersion temperature sensor QAE212... and QAP21.3
Outside temperature (the controller automatically identifies the type of sensor used):
Outside sensor QAC22 (LG-Ni 1000 sensing element)
Outside sensor QAC32 (NTC 575 sensing element)
Room temperature; there are two types of room units available:
Heating Controller RVP201, RVP211
Type ref.
RVP201.0
RVP211.0
AUZ3.1
AUZ3.7
CE1N2464en
2017-07-31