3Com 2940, 2941 Install And Operation Instructions page 15

mounting
holes
These slots fit over the heads of wall-
mounting screws to secure the modem to
the wall. A mounting template for marking
the location of the mounting screws is
included in the foldout Installation Guide
that accompanies this manual.
12
H S I
ARDWARE AND OFTWARE NSTALLATION
1. Remove the mounting template from the
Installation Guide.
2. Place the mounting template against the
wall at the location chosen for the cable
modem. The template should be parallel
to and at least 20 inches (50 cm) from
the floor. Insert pushpins through the
template cross hairs into the wall to mark
the locations for the screws.
3. Secure the mounting screws into the
wall. Do not drive the screws flush to the
wall. The screw head should be at least
¼" (6 mm) away from the wall so it can
lock into the slots on the modem's case.
4. Fit the slots in the brackets on the
modem's underside over the screw heads
and let the modem slide down into
position.