Programming of Time Zone 2 Time Zone 2 On-Time Programming of Time Zone 2 Time Zone 2 Off-Time...
Page 13
Time Zone 2 Set Temperature Programming of Time Zone 2...
Page 16
Remove Control witch from Remote Receiver by pulling out gently. Remove spring loaded Battery Pack by pushing in and then pulling out. Remove Receiver from Bracket and discard bracket. (This Bracket is no longer required after this step.) OTE: After this step, installation of the E21 differs from the rest of the units.
Page 17
Remove Bottom Glass Trim. Place Remote Receiver under firebox. Place Heat hield over Receiver. ontinuation For E21 Installation Only shown below. Ensure wires do not touch base of firebox. Re-install Bottom Glass Trim. ecure Heat hield with 2 screws as...