Table of Contents
Advertisement
LEAVE THE APPLIANCE SWITCHED OFF FOR 24 HOURS AND
THEN SWITCH IT BACK ON, IF E4 REAPPEARS THEN
CONTACT THE BAUMATIC SERVICE DEPARTMENT.
E5
o Switch cannot shut off automatically- program not finishing its
cycle.
Low voltage or power switch failure.
Call Baumatic Service Department.
E6
o Open circuit
Thermistor
Call Baumatic Service Department.
E7
o Short circuit
Thermistor
Call Baumatic Service Department.
Once you have taken action to rectify the problem that has caused the
fault code to appear, plug the machine back into your mains power
supply. Turn the machine on using the ON/OFF button.
Downloaded from
www.Manualslib.com
IMPORTANT: If any other fault code appears in the
display window, you should not attempt to clear it yourself
and contact the Baumatic Service Department.
IF THE FAULT CODE REAPPEARS AFTER FOLLOWING
THE ABOVE ADVICE AND CLEARING THE FAULT
CODE. YOU SHOULD TURN OFF THE APPLIANCE;
DISCONNECT THE APPLIANCE FROM YOUR MAINS
SUPPLY. THEN ARRANGE FOR AN ENGINEER TO
ATTEND THE APPLIANCE. YOU SHOULD CONTACT
BAUMATIC SERVICE ON TELEPHONE NUMBER (0118)
933 6911.
IF AN ENGINEER ATTENDS DURING THE GUARANTEE
PERIOD AND FINDS THAT A FAULT HAS BEEN
CAUSED BY AN ITEM ON THE ERROR CODE LIST,
WHICH COULD HAVE BEEN CLEARED BY THE
CUSTOMER. THEN YOU MAY BE LIABLE FOR THE
COST OF THE SERVICE CALL.
manuals search engine
28
Advertisement
Table of Contents
