Pioneer AVH-P7900DVD Service Manual page 108

1
[Calibration verification]
[Outline]
I The normalized coordinate and the coordinate after calibration correction at the time of pressing the touch panel
A
are displayed for verification of the operation.
A cross cursor (red, blue) is displayed at the pressed location.
16 " + " cursors in white are displayed at the location where a "+" cursor is displayed during calibration.
(It cannot be moved.)
[Display specifications]
B
C
I A display at the time of pressing the touch panel.
D
G Each displayed coordinate shall be as follows.
The values under [Factory] are the corrected values in the Factory region and the values under [User] are
the corrected values in the User region.
• panel X_before
• panel Y_before
E
• panel X_after
• panel Y_after
G " + " displayed at the pressed location is as follows.
• Red " + ": The location when the corrected value of the Factory region is used.
• Blue " + ": The location when the corrected value of the User region is used.
When your finger is released from the touch panel, the cross cursor will continue to be displayed at the
location where the finger pressed last.
[Key operation specifications]
Operational description Main unit key
F
To top menu
108
1
2
: Normalized X coordinate of the pressed location.
: Normalized Y coordinate of the pressed location.
: X coordinate of the pressed location after calibration correction.
: Y coordinate of the pressed location after calibration correction.
Remote controller key
WIDE
AVH-P7900DVD/RE
2
3
MENU_ENTER
3
4
4