Yaesu FT-60R Quick Manual page 6

FT-60R Quick Guide
Set Mode Item Function
35 [RESUME] Selects the Scan Resume mode.
36 [REV/HM] Selects the function of the [HM/RV]
key.
37 [RF SQL] Adjusts the RF Squelch threshold
level.
38 [RPT.MOD] Sets the Repeater Shift Direction.
(Default depends on radio version.)
39 [PRI.RVT] Enables/disables the Priority Revert
feature.
40 [RX MOD] Selects the receiving mode.
41 [RXSAVE] Selects the Receive-mode Battery
Saver interval ("sleep" ratio).
42 [S SRCH] Selects the Smart Search Sweep
mode.
43 [SCN MD] Selects Memory Scan or the channel-
selection mode.
44 [SCN.LMP] Enables/Disables the Scan lamp while
paused.
45 [SHIFT] Sets the size of the repeaters shift.
(Default depends on radio version.)
46 [SKIP] Selects the Memory Scan "Skip"
channel-selection mode.
47 [SPLIT] Enables/Disables split CTCSS/DCS
coding.
48 [SQL.TYP] Selects the Tone Encoder and/or
Decoder mode.
49 [STEP] Setting of the synthesizer steps.
50 [TN FRQ] Setting of the CTCSS Tone
Frequency.
51 [TOT] Setting of the Time-Out Transmitter
timer.
52 [TX.LED] Enables/Disables the TX LED while
the radio is transmitting.
53 [TXSAVE] Enables/Disables the Transmitter
Battery Saver.
54 [VFO.BND] Enables or disables the VFO band
edge limiting for the current band.
Page 4
(KI6AQW) Richard Barr Hibbs, P.E.
Available Values
(Default)
BUSY /
TIME
<REV>
S-1 / S-2 / S-3 / S-4 /
S-5 / S-6 / S-8 / S-
FULL /
RPT.OFF / RPT.– /
RPT. +
RVT.OFF
RVT.ON
AUTO /
200 MS
500 MS / 1 S / 2 S /
OFF
SINGLE
ONLY /
ON /
0.00-99.95 MHz
OFF /
ONLY
SPL.OFF
OFF /
TSQL / REV TN /
DCS
5 / 10 / 12.5 / 15 / 20
/ 25 / 50 / 100 kHz,
or
AUTO
50 CTCSS tones
(100 Hz)
1MIN - 30MIN of
OFF
LED ON
LED.OFF
SAV.OFF /
SAV.ON
BAND /
HOLD /
/ <HOME>
OFF
/
FM / AM
/ 300 MS /
/ CONT
MEM
OFF
SKIP /
/ SPL.ON
TONE /
/
ALL
July 10, 2011