Connect The Label Printer To A Computer - Brother QL-1100 Quick Setup Manual

Connect the Label Printer to a Computer

You can connect the Label Printer to a Windows computer or Mac using a USB Cable.
Connect Using a USB Cable
1.
Turn the Label Printer Off.
2.
Connect the USB Cable to the USB Port on the back of
the Label Printer and on your computer's USB Port.
3.
Turn the Label Printer On.
NOTE
For more information, see the User's Guide.
8. Use the Label Printer with a Computer (P-touch Editor Lite) (Windows
only)
1.
Turn the Label Printer On, then press and hold the
P-touch Editor Lite Button until the green P-touch Editor
Lite LED turns On.
NOTE
P-touch Editor Lite is set to Off as the default mode.
2.
Connect the USB Cable to your computer.
NOTE
If you are connecting the Label Printer using a USB Cable, it may not be detected correctly. If this happens, unplug the
USB Cable, make sure the Label Printer is On, and then reconnect the USB Cable.
2
1. Editor Lite LED
2. Editor Lite Button
1