Error Codes - Kenmore 1469 Use & Care Manual

Problem
Yellow or brown film on inside
surfaces of dishwasher.
Dishes don't dry.
Lamps do not illuminate.
Spray arms do not rotate
smoothly.
Upper rack is crooked.
Dishwasher continuously
beeps when the door is
opened, during or right after
a cycle has completed.

Error Codes

Problem
IE Error
OE Error
FE Error
E1 or AE Error
HE Error
tE Error
LE Error
nE Error
26
Possible Cause
Coffee or tea stains.
Rinse agent dispenser empty.
Power is not connected.
Holes of spray arms are blocked by food
particles.
Rack is poorly adjusted.
The contents of the dishwasher are hot
and care should be used when placing
your hands inside the dishwasher.
Possible Cause
Water inlet problem.
Drainage Problem.
Air gap or disposal is clogged.
Filters are clogged.
Excessive Water supplied.
Water leakage problem.
Heater circuit failure.
Thermistor failure or very high inlet water
temperature (over 194 °F)
Motor trouble
Vario motor trouble
Solutions
• Eliminate the stain by using a stain removal
product.
• Check and refill the rinse agent dispenser if
empty.
• Connect power supply.
• Clean the holes of spray arms.
• See the Deluxe Adjustable Two-Position Rack
section.
• Close the door until the dishwasher and dishes
have cooled down. The beeping will stop if
the door is closed or the interior temperature
has cooled.
Solutions
• Check for a clogged, kinked or frozen water
inlet hose.
• Check water supply.
• Check for a clogged, kinked or frozen drain
hose.
• Clean air gap or disposal.
• Clean Filters.
• Please call 1-844-553-6667 (U.S.A.),
1-800-469-4663 (Canada).