Understanding Raw Output Feature - Panasonic AU-EVA1 Manual

4. Understanding advanced features

4-9. Understanding RAW output feature

10-bit RAW data output is available for the greatest flexibility in post image adjustment. The RAW
data is output from SDI OUT (RAW data cannot be recorded with the built-in recorder in the EVA1).
Settings to use RAW data output
1. Set output mode in MENU > SYSTEM SETTINGS > SYSTEM MODE > SDI RAW item.
Available maximum frame rate for variable frame rate record (VFR) and view angle vary as
described in the chart below.
SDI RAW menu
S35 5.7K
CROP 4K
CROP&MIX 2K
2. Connect a recorder (support EVA1's RAW data record) to SDI OUT and record.
*Output data resolution and maximum available frame rate (for variable frame rate record mode)
vary by settings in the chart below.
FREQUENCY
23.98p, 24.00p, 29.97p
25.00p
50.00p
59.94p
59.94i, 50.00i
6G SDI x1
Use entire active plane of the imager, and output RAW data
from all active pixels (5760x3072).
Use a part of the imager, and output RAW data from all active
pixels within the part (4096x2160).
Use a part of the imager, and generate RAW data
(2048x1080) by mixing pixels.
Image plane
S35 5.7K (5760x3072 pixels)
CROP 4K (4096x2160 pixels)
CROP&MIX 2K (2048x1080 pixels)
S35 5.7K (5760x3072 pixels)
CROP 4K (4096x2160 pixels)
CROP&MIX 2K (2048x1080 pixels)
CROP 4K (4096x2160 pixels)
CROP&MIX 2K (2048x1080 pixels)
CROP 4K (4096x2160 pixels)
CROP&MIX 2K (2048x1080 pixels)
No RAW data out available
Description
S35 5.7K
CROP 4K, CROP&MIX 2K
SDI RAW
71
Max. fps
30fps
60fps
240fps
VFR
1 – 30fps
1 – 60fps
1 – 240fps
1 – 25fps
1 – 50fps
1 – 200fps
1 – 50fps
1 – 200fps
1 – 60fps
1 – 240fps