Assignable Functions - Panasonic AU-EVA1 Manual

2. Preparation before filming

2-4-2. Assignable functions

( ) : Feature that turns OFF when switch off the unit once.
Menu item
INHIBIT
AWB
ONE PUSH AF
ONE PUSH A.IRIS
( ) ATW LOCK
E.I.S.
( ) D.ZOOM
IR SHOOTING
REC SW
PRE REC
REC CHECK
DEL LAST CLIP
SLOT SEL
( ) EXPAND
OPEN IRIS FA
( )PEAK/SQUARES
FA
( ) WFM
( ) SPOT METER
ZEBRA
LEVEL GAUGE
LEVEL GAUGE SET
SDI COLOR
HDMI COLOR
LCD COLOR
( ) LCD CLEAN
VIEW
LCD MARKER
( ) COLOR BARS
( ) POWER LCD
The USER button is disabled (nothing is assigned).
Perform the auto white balance adjustment.
Focus mode becomes AUTO while keep pressing the USER button. This
function works with lenses equipped with AF function.
Iris mode becomes AUTO while keep pressing the USER button.
Maintain and lock the last white balance achieved by ATW mode.
Turn ON/OFF the electric image stabilizer.
Use 1.4x digital zoom (electric image magnification) feature.
Turn ON/OFF the Infrared shooting feature.
Perform record start/stop.
Turn ON/OFF the pre-record mode. This mode allows the camera to start
recording video and audio approx. 10 seconds (when MAIN PIXEL
setting is set to 1280x720, 1920x1080, or 2048x1080), approx. 5 seconds
for the others.
Plays last 3 seconds of the latest recorded clip on the SD memory card.
Delete the last clip from the SD memory card.
Switch SD memory card slots for recording/playing back.
Turn ON/OFF image magnification focus assist function.
Turn ON/OFF a focus assist function that makes focusing easier by
opening aperture (i.e. by making depth of field shallower).
Turn ON/OFF peaking and square focus assist function.
Focus mode (peaking or square) can be set: MENU > OUTPUT
SETTINGS > LCD FOCUS ASSIST > PEAK/SQUARES MODE
Display the waveform or vector scope on the LCD monitor. Display type
can be set in MENU > OUTPUT SETTINGS > LCD EI ASSIST > WFM
MODE
Turn ON/OFF the spot meter function. It is available when following menu
setting is set to "SPOT METER".
MENU > OUTPUT SETTINGS > SDI/HDMI INDICATOR or LCD
INDICATOR
Turn ON/OFF the ZEBRA indicator.
Display a level gauge on the LCD monitor for the horizontal and vertical
axis. Indications can be indicated up to approx.30 degrees in the
horizontal directions and, and up to approx. 30 degrees in the vertical.
Set the current horizontal and vertical position as the reference point for
the level gauge.
Switch image color (SDI OUT).
Switch image color (HDMI OUT)
Switch image color (LCD OUT)
Show/hide characters on/from the LCD OUT image.
Show/hide a marker on/from the LCD OUT image.
Turn ON/OFF the color bars display.
Boost up brightness of LCD panel for outdoor use.
Description
24