Top Panel - ION Trio LP Quick Start Manual

Features

Top Panel

1. Platter: Place your record here.
2. 45 RPM Adapter Holder: Holds the
included 45 RPM adapter. When not
using the adapter, please place it in
this holder.
3. Tonearm: The fixed tonearm can be
raised and lowered by hand, or by
pressing the raise / lower lever.
4. Arm Clip: This specially designed
arm clip secures the tonearm while at
rest or when not in use. The arm clip
has been designed to remain in the
up position while unlocked.
5. Raise / Lower Lever: Raises and
lowers the tonearm.
6. Autostop switch: This switch turns autostop
on or off. When autostop is on, the platter will
start spinning when the tonearm is placed over
the record and stop spinning when the record
has reached the end. When Autostop is off, the
platter will always spin regardless of the
position of the tonearm.
Note: If your vinyl record stops before it
reaches the end of the music, turn Autostop to
the off position for this particular record. This is
generally recommended for 45 RPM records.
7. 33 / 45 / 78 RPM Switch: This switch controls the speed of the turntable platter.
Note: For best results when playing 78 RPM vinyl records, use a 78 RPM stylus (sold
separately). Only use a 78 RPM stylus with 78 RPM vinyl records.
4
2
1
IMPORTANT: Remove
cartridge cover (needle cover) before
operating the turntable.
*WARNING: The RCA outputs are LINE
level. Please only connect these to LINE
level inputs. You may damage your
receiver if you plug in a LINE level device
into a PHONO level input.
3
5
6
7
4
the plastic