Table of Contents
Related Manuals for Hellenbrand PM6 IC Storm 10
Summary of Contents for Hellenbrand PM6 IC Storm 10
- Page 1 STORM ProMate-6.0 Iron Curtain Storm Series Consumer’s Filter Manual p/n 111701 Rev. B Updated 10/30/17 © 2017 Manufactured by: HELLENBRAND, INC. 404 Moravian Valley Road • Waunakee, Wisconsin 53597 www.hellenbrand.com • info@hellenbrand.com...
-
Page 2: Table Of Contents
This owner’s manual is designed to assist owners and installers with the operation, maintenance and installation of your new water filter. It is our sincere hope that this manual is clear, concise and helpful. Detailed instructions on general operating conditions, pre-installation and installation instructions, start-up, and meter programming are included. -
Page 3: General Specifications
Gallon Range .........................20 - 50,000 DIMENSIONS Drain Line ..........................3/4” or 1” NPT Ozone Check Valve ........................3/8” Poly Tube ELECTRICAL CURRENT DRAW AND VOLTAGE ................2.0A/120V NOTE: Operating outside of the optimum pressure range may affect system function. Contact your Hellenbrand support team for information. -
Page 4: Pre-Installation Check List
PRE-INSTALLATION CHECK LIST (All electrical & plumbing should be done in accordance to all local codes) Storm is limited to indoor installations with lime and/or iron must be replaced. If piping is blocked with Water Pressure: A minimum of 25 pounds of water pressure iron, additional equipment may be needed ahead of the filter to (psi) is required for regeneration. -
Page 5: Startup Instructions
Start Up Instructions For optimal results, allow the filter media to soak for a 5. Initiate backwash by holding “REGEN” button down until minimum of 12 hours prior to install. This helps to main- piston movement is heard. tain the manufacturer’s specified filtration properties. 6. -
Page 6: Programming
PROGRAMMING General Information 12:00 The control valve is the “brain” of your water filter. It consists of the valve body and powerhead with solid state microprocessor. The display panel (see Figure 5) consists of the LCD dis- play and five push buttons which are used in displaying and programming the water filter settings. -
Page 7: Set Time Of Day
SET TIME OF DAY = Up Arrow = Down Arrow STEP 1 Step 1 - Press SET CLOCK. Step 2 - Current Time (hour): Set the hour of the day using or buttons. AM/PM toggles after 12. Press NEXT to go to step 3. STEP 2 SET TIME 6:35... -
Page 8: Trouble Shooting
TROUBLE SHOOTING PROBLEM CAUSE CORRECTION Control valve stalled in regeneration A. Motor not operating A. Replace Motor B. No electric power at outlet B. Repair outlet or use working outlet C. Defective transformer C. Should provide 12 volts when plugged into outlet, if not, replace transformer D. -
Page 9: Parts Diagrams & Installation Fittings
PM6 IC STORM Item Description Part # Metered Control 110270, specify flow control 3&4 Mineral Tank Assembly IC-Storm 1054 Filter Tank 104022 Tank & Distributor Tube Only IC-Storm 1252 Filter Tank 108294 Tank & Distributor Tube Only IC-Storm 1354 Filter Tank 108295 Tank &... -
Page 10: Front Cover And Drive Assembly
FRONT COVER AND DRIVE ASSEMBLY P/N: 110038 ITEM NO. DESCRIPTION QTY. ORDER NO. 103473 PM 6.0 Cover Assy w/Label 102096 Motor 101262 Drive Bracket & Spring Clip 109807 PM 6.0 - PC Board 101746 Drive Gear 12x36 101459 Drive Gear Cover 103724 Relay Kit Option Installed 102385... - Page 11 INJECTOR CAP, INJECTOR SCREEN, INJECTOR, PLUG AND O-RING QTY. ITEM NO. DESCRIPTION ORDER NO. 101375 Injector Cap 102159 O-ring 135 102457 Injector Screen 102319 Injector Assy. Z Plug-Filter 101825 Injector Assy. A Black 101826 Injector Assy. B Brown 101827 Injector Assy. C Violet 101828 Injector Assy.
- Page 12 DRAIN LINE - 3/4” ITEM NO. DESCRIPTION QTY. ORDER NO. 101414 Elbow Locking Clip 101871 Polytube Insert, 5/8” Optional 102131 Nut, 3/4” Drain Elbow Optional 101619 Drain Elbow 3/4” Male Asy-No Vent 102153 O-Ring 019 102406 DLFC Retainer Assy.
- Page 13 BYPASS VALVE QTY. ITEM NO. DESCRIPTION ORDER NO. 101325 Complete Bypass Assembly NOTE: Individual Bypass Components Are Not Available, Must Order Complete Bypass Assembly. ITEM NO. DESCRIPTION QTY. ORDER NO. Not Shown 101172 Bypass 90º Vert. Assy. 102141 Nut 1” Quick Connect 102437 Split Ring 102165...
-
Page 14: Recommended Annual Maintenance
RECOMMENDED ANNUAL MAINTENANCE Annually • Test raw water, assure filter settings are appropriate for the application. Note and record any changes. • Verify injector is clean and functioning. (stock code 101832) • View head of air and determine need for cleaning inlet diffuser by running at service flow and then note difference when bypass open. -
Page 15: Air Regen Specifications
PROMATE 6 IC STORM WITH AIR REGEN SPECIFICATIONS PROMATE 6.0 IC STORM w/AIR REGEN SPECIFICATIONS MODEL PM6 IC Storm 10 PM6 IC Storm 12 PM6 IC Storm 13 FACTORY PRESET MINUTES Backwash # 1 : Seconds 0:10 0:10 0:10 Draw DN # 1 : Minutes *Water Usage (Gallons) sequence # 1 10.2... -
Page 16: Warranty
® ® Hellenbrand, Inc., warrants to the original consumer purchaser that the system and the parts listed below will be free from defects in material and/or workmanship from the date of the original installation for the following time periods: For a Period of FIVE YEARS: The filter control valve electrical parts including the motor and board, control valve body, excluding internal parts.