Cisco Nexus 9348Gc-Fxp Nx-Os Mode Hardware Installation Guide - Cisco Nexus 9348GC-FXP NX-OS Hardware Installation Manual

Overview
1 Management port (RJ-45 port)
2 Console port (RS-232 port)
3 Management port (SFP port)
4 Grounding pad
5 USB port
Note USB support is limited to USB 2.0 devices that use less than 2.5 W (less than 0.5 A inclusive of surge
current). Devices, such as external hard drives, that instantaneously draw more than 0.5 A are not supported.
Depending on whether you plan to position the ports in a hot or cold aisle, you can order the fan and power
supply modules with port-side intake or port-side exhaust airflow. To determine the airflow direction of the
modules installed in your switch, see the following table.
Replaceable Modules
Fans

Cisco Nexus 9348GC-FXP NX-OS Mode Hardware Installation Guide

6
6 Chassis LEDs (Beacon [BCN] and Status [STS])
7 Fan module (3) with fan slot 1 on the left and fan
slot 3 on the right
8 Power supply (2) one used for operations and
one used for redundancy, with power supply slot
1 on the left and slot 2 on the right
9 Screw holes (6) for attaching rack mounting
brackets
Port-Side Intake Airflow Coloring
Burgundy
Overview
Port-Side Exhaust Airflow Coloring
Blue