RedMax SGCZ2401S Owner's/Operator's Manual page 36

OP8
OP10
OP12
OP14
36
OP9
OP11
OP13
English
8. Operation
■ CUTTING WORK
This machine does cutting not by a rotary cutter like
conventional trimmers but by a pair of special blades
that moves round within a limited angle at a speed of
approximately 1/30 of conventional trimmers. This
unique mechanism has brought you many benefits as
following;
1. Since the blade does not cause grass chips and
pebbles to be thrown around, you may use less care
about your clothing or surrundings.
2. Should the blade hit a rogid object like stones, trees
or steel poles during operation, it does not produce a
bounce motion that can cause loss of machine
control.
3. Since the blade does not cause cut grass to wrap
around the neck, you need not to stop operation to
remove such wrappers.
4. What's more, since the whole circle of the blade is
available for cutting, you can move the cutting head
in all directions and cut grass growing on such place
difficult-to-get by conventional trimmers. You can
even trim the waterside without splashing water.
WARNING
For your health and to prevent the risk from
vibration, refrain from working for a long time at
the cold temperature.
RECOMMENDED APPLICATIONS:
• Parking area (OP8)
• Roadside (OP9)
• Road edge (OP10)
• Near fences (OP11)
• Around stones (OP12)
• Among trees (OP13)
• Waterside (OP14)