Electrical Data Notes For The Compressors; Distribution Of Compressors Per Circuit - Carrier 30RBM 160 Installation, Operation And Maintenance Instructions

For the high-pressure single and dual-pump motors of 30RBM/RBP 160-520 units (options 116R, 116S, 116V, 116W)
No. Description
(2) (3)
1 Nominal efficiency at full load and nominal voltage
1 Nominal efficiency at 75% of full load and nominal voltage
1 Nominal efficiency at 50% of full load and nominal voltage
2 Efficiency level
3 Year of manufacture
4 Company name or trademark, commercial registration number and
head office of manufacturer
5 Product model number
6 Number of motor poles
7-1 Nominal shaft power output at full load and nominal voltage (400 V) kW
7-2 Maximum input power (400 V)
8 Nominal input frequency
9-1 Nominal voltage
9-2 Maximum current drawn (400 V)
10 Nominal speed
11 Product disassembly, recycling or disposal at end of life
12 Operating conditions for which the motor is specifically designed
I - Altitudes above sea level
II - Ambient air temperature
III - Maximum operating temperature
V - Potentially explosive atmospheres
(1) Required by regulation No. 640/2009 concerning the application of directive 2005/32/EC on the eco-design requirements for electric motors.
(2) Item number imposed by regulation No. 640/2009, annex I2b.
(3) Description given by regulation No. 640/2009, annex I2b.
(4) To obtain the maximum input power for a unit with hydronic module, add the maximum unit input power from the electrical data table to the pump power input.
(5) To obtain the maximum unit operating current draw for a unit with hydronic module, add the maximum unit current draw from the electrical data table to the pump current draw.
(6) Above 1000 m, a degradation of 3% for each 500 m should be taken into consideration.

5.7 - Electrical data notes for the compressors

Cp
00PSG001961100A
00PSG001748000A
Cp Compressor
I Nom Nominal current draw (A) at standardised Eurovent equivalent conditions (see definition of conditions under nominal unit current draw)
I Max Maximum operating current (A)
LRA Locked rotor current (A)
Cos phi Max @I Max

5.8 - Distribution of compressors per circuit

Cp
00PSG001961100A
00PSG001748000A
Cp Compressor
I Nom Nominal current draw (A) at standardised Eurovent equivalent conditions (see definition of conditions under nominal unit current draw)
I Max Maximum operating current (A)
LRA Locked rotor current (A)
Cos phi Max @I Max
(4)
(5)
I Nom
30
37
Circuit 160
A 1
B 2
A -
B -
Units 30RBM/30RBP
160 180 200
% 87,5 87,5 87,5
% 88,2 88,2 88,2
% 87,5 87,5 87,5
- IE3
- This information varies depending on the manufacturer and model at the time of
incorporation. Please refer to the motor nameplates.
- Same as above
- Same as above
- 2 2 2
3 3 3
kW 3,81 3,81 3,81
Hz 50 50 50
V 3 X 400
A 6,81 6,81 6,81
rps - rpm 48 - 2900
- Disassembly using standard tools. Disposal and recycling using an appropriate company.
m < 1000
(6)
°C < 40
°C "Please refer to the operating conditions given in this manual or in the specific
conditions in the Carrier selection programs."
- Non ATEX environment
I Max I Max
Un Un-10 %
41 44
50 54
180 200 220 260
- - 2 -
2 - 2 -
1 1 - 2
- 2 - 2
220 260 300 330 360
87,5 89,9 89,9 89 89
88,2 90,4 90,4 90 90
87,5 89,6 89,6 89,7 89,7
2 2 2 2 2
3 4 4 5,5 5,5
3,81 4,96 4,96 6,80 6,80
50 50 50 50 50
6,81 8,27 8,27 11,30 11,30 11,30 15,30 15,30 15,30
LRA
Un
215
260
300 330 360 400
- - 3 -
3 - - -
2 2 - 3
- 3 3 3
400 430 470 520
89 89,6 89,6 89,6
90 90,8 90,8 90,8
89,7 90,8 90,8 90,8
2 2 2 2
5,5 7,5 7,5 7,5
6,80 9,16 9,16 9,16
50 50 50 50
Cosinus
Phi Max
0,89
0,89
430 470 520
3 - -
- - -
- 3 4
4 4 4
19