Digital Board Diversity - Philips DVDR3577H/05 Service Manual

Reference : SGP_AVS_SW_ATLAS-05-05
Version : 0.17
Status : Proposed
Date : 2006-09-12
1
Nucleus Name
Nucleus Number
Description
Technical
Execution Time
User Input
Error
Example
2
Nucleus Name
Nucleus Number
Description
Technical
Execution Time
User Input
Error
Example
Example DTT
Example 5.1 input
3
4
© Philips Electronics N.V. 2006
DS_SYS_SettingsGet
1229
Get the digital board diversity settings string that is programmed in the BROM
on the digital board.
- Set-up IIC-bus.
Read Digital Board Settings from boot EEPROM.
-
Read System Settings from boot EEPROM.
-
- Display the settings.
1 second
None.
Number Description
122900 The settings were successfully displayed.
122901 IIC access failed.
122902 The settings are invalid
DS:> 1229
122900:
44424849716040014C45434F2B0000006020070000010200000101008008000044
564452
323030312E3030310202000000010300000002010000000000000000
Test OK @
DS_SYS_AudioLoopThroughStart
1230
Description: The audio input is routed from the input to all outputs. The input is
set routing the signal with the proper nucleus. All outputs are enabled.
Encode the audio to AC3 in memory
-
- Decode the AC3 in memory to audio on the outputs
1second buffer time and 30 seconds playing.
InputType:
- I2S (default)
- SPDIF (Only for recorders with 5.1 input and DTT module)
InputPort: (Only for recorders with 5.1 input. For DTT modules no parameter
should be filled in, so default is chosen )
- OPT : Optical input path is selected (default)
- COAX : Coax input path is selected
Number Description
123000 AudioLoopthroughStart succeeded
123001 Resetting the audio decoder failed
123002 Resetting the audio encoder failed
123003 Encoding the audio failed
123004 Decoding the audio failed
DS:> 1230
123000:
Test OK @
DS:> 1230 spdif
123000:
Test OK @
DS:> 1230 spdif coax
123000:
Test OK @
Classification : COMPANY RESTRICTED
Project : ATLAS_DSW
Chapter : User Manual
Section : Diagnostic Software (Leco+)
Philips Semiconductors Page 62 of 124