Status : Proposed; Date : 2006-09-12; T Ermination - Philips DVDR3577H/05 Service Manual

Reference : SGP_AVS_SW_ATLAS-05-05
Version : 0.17
Status : Proposed
Date : 2006-09-12
120000: Hardware ID = 0x27
1
Test OK @
2
3
Example in case the result is an error (DVD+RW 2.1 example):
4
5
DS:> 1100
6
110002: Communication with Analogue Board fails
7
Error @
8
9
DS:>
10
11
2.3.4 Termination
12
To turn off the command line interface switch off the DVD Recorder.
13
2.4 END-USER/DEALER SCRIPT INTERFACE
14
This interface is used during execution of the script to display output and error messages.
15
The local display will be used to display the output and the error messages.
16
17
2.4.1 Set-up physical interface components
18
Hardware required:
19
•
DVD Recorder
20
The DVD Recorder is tested stand-alone: no other equipment than the DVD Recorder is
21
needed.
22
23
2.4.2 Activation
24
Pressing the play-key on the keyboard of the DVD Recorder during power-on activates the
25
dealer script.
26
27
2.4.3 Usage
28
The test requires no user interaction. A number of nuclei will be run before a message is
29
returned indicating if there is a failure in the DVD Recorder (''PASS" will be indicated when the
30
product functions OK and "FAIL" when there has been an error during one of the tests).
31
During the execution of this script, a progress indicator is displayed on the display of the DVD
32
Recorder.
33
Note that from the command line interface this script can be started as well, by entering 'script'
34
on it.
35
36
2.4.4 Termination
37
To turn off the dealer test, the DVD Recorder must be powered down.
38
39
40
41
42
43
© Philips Electronics N.V. 2006
Classification : COMPANY RESTRICTED
Project : ATLAS_DSW
Chapter : User Manual
Section : Diagnostic Software (Leco+)
Philips Semiconductors Page 11 of 124