Cisco Sm-X-1T3/E3 Service Module Leds - Cisco SM-X-1T3/E3 Installation Manual

Connecting Cisco T3 and E3 Service Modules to the Network
Figure 2
Tip When connecting the Cisco SM-X-1T3/E3 service module to a port adapter used in another router series,
verify that you are connecting the TX port on the service module with the RX port on the port adapter,
and the TX port on the port adapter to the RX port on the service module.

Cisco SM-X-1T3/E3 Service Module LEDs

The Cisco SM-X-1T3/E3 enhanced service module includes several indicator LEDs.
Table 1
Figure 3
OL-27149-01
Connecting a T3/E3 Service Module to a Networking Device
WS-X 6K-SU P2-2G E
CONSO LE
PORT
MODE
CONSO LE
SUPE RVISO R2
OSM-4O C12 POS-SI
4 PORT OC-12 POS SM
IR
OSM-4O C12 POS-SI
4 PORT OC-12 POS SM
IR
RX
SM-X-1T3/E3
SEE MANUAL BEFORE INSTALLING NETWORK MODULE
EN
CD LP AIS
AL
RX
describe the LEDs on the T3/E3 enhanced service module.
Cisco SM-X-1T3/E3 LEDs
SM-X-1T3/E3
EN
AL
EN AL
LED LED
Switch Load
100%
PORT 1
PCMCI A
EJECT
1%
TX
T3/E3
RX TX
FERF/RAI
TX
SEE MANUAL BEFORE INSTALLING NETWORK MODULE
RX
CD LP AIS FERF/RAI
CD FERF/RAI
LED LED
LP AIS
LED LED
Connecting Cisco T3 and E3 Service Modules to the Network
Cisco SM-X-1T3/E3 Service Module LEDs
PORT 2
Figure 3
T3/E3
TX
and
9